The Flo-Dynamics CMS-240 Coolant Maintenance System, with dual 40-gallon tanks, allows a technician to quickly drain, fill or exchange coolant from large capacity cooling systems in minutes without the need to air bleed. Using push/pull technology, the CMS-240 simultaneously uses pressure and vacuum, speeding up both the draining and filling processes. Refilling without the need to spend hours bleeding air from a cooling system is easy, using push/pull technology and a vehicle�s Flush-Face Quick Connect Coupler cooling system adapter. Without the need to use a drain pan, you can safely and quickly drain a 14-gallon cooling system in approximately 10 minutes, and refill without air pockets in approximately 13 minutes. With two tanks � one for �used� and the other for �new� coolant � a technician can fully exchange coolant in a 14-gallon system in less than 14 minutes without the need to switch hoses or perform hours of bleeding air. The CMS-240 will save repair time costs while creating a safer shop environment by preventing coolant spills.

Dual 40-gallon tanks with fluid level sight tubes

Easy mobility cart with heavy duty 8� casters

Operates on shop air � no 120V or 12V power required

Push/pull technology enables you to:

  - Drain a 14-gallon cooling system in approximately 10 minutes

  - Fill a 14-gallon cooling system without air pockets in approximately 13 minutes

  - Perform a coolant exchange in <14 minutes, fully air bled

Easily switch service hoses with the turn of a valve

Filters and cleans coolant when draining a system

Easy to see coolant level in tank

Internally coated tank prevents rust contamination

13� polyurethane service hoses

Flush-face quick connect couplers and 5/8� � 3� hose adapter kits available

Dimensions: 56� H x 28� W x 54� D

Weight: 288 lb.

Fluid Tanks: Twin 40 gallons

Power: 115 psi shop air